Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

MIA

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).

This design differs from those of the period in that it...

Virginia Park

Designer: 
Reff Reinhart
Skill Level to Build: 
Intermediate

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames. It features a short forward deck, aft deck with splash well for the...

Passagemaker Dinghy

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Here's a handy boat that can be rowed, sailed, and powered with up to three large adults. The Passagemaker Dinghy is easy to build but looks great and performs beautifully

Quattro 16

Designer: 
Woods Designs
Skill Level to Build: 
basic

a 16ft ply/epoxy beach cat available as plans from the designers or from Wooden Boat magazine

Beaver Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

YOUNG BAGGIE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
advanced

YOUNG BAGGIE, with a hull length of 4 m, is the medium size of the three boats we designed drawing inspiration from the traditional sandbaggers.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...