Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Digger 17

Designer: 
Paul (PAR) Riccelli
Skill Level to Build: 
novice

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

START 60

Designer: 
ACDesign
Skill Level to Build: 
beginner

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.

The hull lines and the deck are to corner for simplicity of...

Pulsar 50

Designer: 
Erik Lerouge
Skill Level to Build: 
High

With outstanding performance, a cruising-racing trimaran provides a fabulous sailing program:
Besides the possibility of racing, speed extends her range and distant cruise grounds may be reached during our too short holidays.

Pulsar...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

7.2 Meter PAKETI

Designer: 
David Payne
Skill Level to Build: 
Intermediate to Advanced

This 24' Australian design provides three arrangements to choose from-a small cuddy, or two cabin styles.

Construction is plywood with a single hard-chine.

Construction: Plywood planking over sawn frames.

Alternative...

START 65

Designer: 
ACDesign
Skill Level to Build: 
beginner

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.

The construction method is the “stitch and paste” because of its small size.

The hull is in CPM...

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.