Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

Daysailer 30'

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

Caledonia Yawl II

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

This is the 7 plank per side, which some folks will feel is...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

20' 3" Sloop LITTLE GULL

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans...

Pulsar 36

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

A trimaran is a good choice for those who want to get very high performance on a cruising boat.
The flared main hull offers nice cruising accommodation with two large double cabins, a convenient dinette, standing headroom at the galley,...

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.