Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

Noank Pulling Boat

Designer: 
Nick Schade
Skill Level to Build: 
Intermediate

The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel. It has two large floatation chambers that can store a massive amount of gear if you should wish to go for an expedition.

This...

Panga25

Designer: 
Jacques Mertens
Skill Level to Build: 
easy, some epoxy experience useful

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

Volare Utility

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

K-42

Designer: 
Paul R. Kotzebue, PE
Skill Level to Build: 
Intermediate

42 foot modified Skerry Cruiser sloop.