Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Optimist Dinghy Template Plans

Designer: 
Clark Mills
Skill Level to Build: 
Beginner/Intermediate

If you are considering building a wood-epoxi Optimist dinghy, you will definitely need our Optimist Dinghy Template Plans.

The Optimist Dinghy Template Plans not only contain the description and dimensions of each and every part, all...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

THALAS 16'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The length of the American Whitehall of the 19th century was between 13′ and 23′. 16′ was the most typical length and the boats were built for 2 or 3 rowers. The classical boat has been re-elaborated to make the design of the boat coherent with...

Elf

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 8 sheets with photocopies of Classic Boat building series.

Sail Area - 53 sq. ft.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

ROBERTS 31

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 31 - Fiberglass construction. Over 100 of this design have been built in various part of the world. Several have made trans ocean voyages.