Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

ACYD 40

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The Class 40 allows the creation of highly performing and low cost projects. It's forbidden the use of aramid fibers and carbon, honeycomb cores, prepreg fiber for hull construction.

There are only granted carbon fiber for the...

24' Sloop, Amphibi-ette

Designer: 
Mt. Desert Yacht Yard
Skill Level to Build: 
Intermediate to Advanced

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans...

Wynfall

Designer: 
Mark Smaalders
Skill Level to Build: 
moderate

26' Bermudan or gaff-rigged cutter for construction in wood and epoxy

JAM 8

Designer: 
Edward Sutt
Skill Level to Build: 
Beginner

The JAM 8 is a true personal watercraft. While only 7 foot 4 inches long, it can carry up to 200 pounds. The JAM 8 is perfect for exploring flat water rivers, ponds and marshes.

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...