Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Riva Scoiattolo Replica 1950's

Designer: 
Orinally by Riva, converted to CAD by Classic Wooden Boat Plans
Skill Level to Build: 
Beginer to advanced

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little...

Newport Runabout

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.

Construction: Batten-seam planking over sawn frames.

Lofting is required.

Plans include 4 sheets.

Caledonia Yawl II

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

This is the 7 plank per side, which some folks will feel is...

Mill Creek 13

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 13 looks good, they're easy to build, and even though they are more stable than most kayaks, the Mill Creek 13 offer good speed and handling that you'll never get tired of.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...

GulfStream 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience

The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Hyak

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Hyak is a single kayak designed for multi-day excursions and recreational racing.