Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

BLUEMOTION 550

Designer: 
Keith Callaghan
Skill Level to Build: 
Moderate

BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013. The design is a direct derivative of my Hazardous Zero-9 Merlin Rocket design, and has sufficient horsepower to provide a superb sailing experience, but with the reassurance...

KIS 4.7

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

18' Swampscott, JOHN DORY

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

A refinement of the traditional Swampscott working dory for recreational use.

Plans include nine different rigs.

Construction: Glued lapstrake plywood over sawn frames.

Alternative construction: Traditional dory construction...

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

Sharpie 31.5 EGRET

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

Sharpie 31.5′ EGRET

L.O.A.: 31′ 6 ½″
SPARRED LENGTH: 35′ 6″
L.W.L.: 26′ 3″
BEAM: 8′ 6″
DRAFT: 1′ 2 ¼″ /4′ 8″
SAIL AREA : (Depends on rig)
DISP.: 5,000# (approximate, for cruising)
BALLAST: 1,500 lbs....