Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Pilot Schooner 28

L.O.A.:  29′ ½″

L.B.P.:  28′ 10 ½″

L.O.D.:  27′ 9″

L.W.L.:  25′ 3 ½″

BEAM:  9′ 4″

DRAFT:  3′ 10″

SAIL AREA :  413 sq. ft.

DISP.:  9,500lbs. (approximate, for...

Sundowner

Designer: 
John Welsford
Skill Level to Build: 
basic woodworking skills

Exploration grade voyager, small cruising yacht designed for the amateur builder with ambitions to see far off places. Gaff cutter rig, long keel, inboard diesel engine.

Top Hat

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.

Jimmy Skiff

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Before the advent of the outboard motor, rowing/sailing skiffs were common on Chesapeake Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend.

24' Sloop, Amphibi-ette

Designer: 
Mt. Desert Yacht Yard
Skill Level to Build: 
Intermediate to Advanced

This is a centerboard cruising boat for couples and small families. Lightweight and strong, it can be easily hauled with a trailer. Construction: Plywood topsides over bulkheads and stringers; strip planked bottom Lofting is required. Plans...

VOYAGER 388

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER 388 CRUISING SAILBOAT STEEL KIT or PLANS & CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS & FSP