Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

West River 18

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

The West River 18™ has built a huge following thanks to its speed, comfortable cockpit, and lithe good looks.

Murphy - RYD-16.2

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
handy novice

RYD-16.2 is a wholesome dayboat that can be rigged as a free standing cat or sloop. Large, roomy cockpit, taped seam construction, centerboard and kick-up rudder.

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

MAYDA 39

Designer: 
Luigi Consoli
Skill Level to Build: 
Medium

Light displacement boat, that resume classic water lines into a modern conception.

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...

12' Marisol

Designer: 
Gifford Jackson
Skill Level to Build: 
Basic to Intermediate

Open daysailer featuring plywood construction.

Construction: Lapstrake plywood over sawn frames

No lofting is required

Rig: Sliding Gunter

Plans include 35 sheets

Lumber Yard Skiffs

Designer: 
Walter Baron

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing. Construction style was also kept simple,...

Riva Scoiattolo Replica 1950's

Designer: 
Orinally by Riva, converted to CAD by Classic Wooden Boat Plans
Skill Level to Build: 
Beginer to advanced

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little...