Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

ACYD 40

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The Class 40 allows the creation of highly performing and low cost projects. It's forbidden the use of aramid fibers and carbon, honeycomb cores, prepreg fiber for hull construction.

There are only granted carbon fiber for the...

Sail Kit for kayaks

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

It’s designed with two variants: one adaptable to Naiade and Ondina (version A), and the other...

Virginia Park

Designer: 
Reff Reinhart
Skill Level to Build: 
Intermediate

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames. It features a short forward deck, aft deck with splash well for the...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Olga 28

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

The Olga 28 was designed as a light, relatively fuel efficient cruising boat for the waters around Orcas Island, in the Salish Sea, where the Strait of Juan de Fuca and the Strait of Georgia meet. Strong currents are the norm, and while winds in...

Spike Skiff 12' 3"

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail...

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Night Heron

Designer: 
Nick Schade
Skill Level to Build: 
moderate

An Inuit inspired strip planked sea kayak. Fast, efficient and responsive. A graceful design that paddles beautifully