Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Skerrieskiff 17'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Pax 20

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Pelicano Shrimper

Designer: 
Sam Devlin
Skill Level to Build: 
Moderate

The drawing board of Sam Devlin has created another winner. The Pelicano Shrimper is an excellent choice for anyone who wants to maximize practicality in an 18' 4" package. The design has a small cabin forward, with enough space for a v...

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...