Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

SCHEGGIA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

SCHEGGIA (designed to compete in 10 Foot Class – www.diecipiedi.it) is narrow at waterline which makes it fast. Thanks to its flare sides stability increases considerably when the boat starts to hee

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

KIS 4.2S

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

25' Dark Harbor 17 1/2

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

25′ LOA carvel-planked daysailer with small cabin. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...