Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...

16' Melonseed Skiff

Designer: 
Marc Barto
Skill Level to Build: 
Intermediate

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam bent frames.

Alternative construction: Cold-molded or...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

7' 7" Nutshell Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.xx

The ladder frame—the “foundation” of the boat—is now included with...

Malabar II

Designer: 
John Alden
Skill Level to Build: 
advanced

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

DRIADE

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
beginner

DRIADE is a light and fast rowing boat, ideal for those who wish to train for rowing with a simpler, easier to handle and cheaper boat than the typical rowing skiff.

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...