Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

PT Skiff

Designer: 
Bieker Boats/ Eric Jolley
Skill Level to Build: 
attentive amateur + (need basic woodworking skills as a minimum)

The PT skiff is a very fuel efficient center console runabout that is good looking, has good handling, can carry a load, and is incredibly quick with only 20 horsepower. The hull shape of the PT skiff was studied with the most advanced design...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

ACYD MINI

Designer: 
ACDesign
Skill Level to Build: 
intermediate

October 8th, 1977, twenty-four “21 feet sailing boats” single handed left Penzance (United Kingdom) for Antigua with a stopover in Tenerife.

The smallest offshore racing boats were born and so was favourite race: the Mini Transat....

SILVER 55

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

The classical hull shape of old wooden runabouts of the 70’s combines perfectly well with the use of marine plywood. This allows SILVER 55 to be in the same time elegant and simple to build.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.