Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

ROBERTS 19

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 
AVERAGE SKILLS

Roberts 19 Trailerable gunkholing and coastal cruiser. Plans and full size frame patterns available for wood epoxy construction.

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

Trawler 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience required

Our Trawler 28 is a sturdy offshore trawler with a straight shaft inboard diesel. This makes the TW28 an ideal boat for a couple to live aboard or for a crew of 4 on vacation.

ROBERTS 482

Designer: 
BRUCE ROBERTS-GOODSON

ROBERTS 482 R/C STEEL OR ALUMINUM

The accommodation could be laid out in many ways and this boat is ideal if you would like to customize your own interior. This is a fast cruising design.

22'4" Dragonfly

Designer: 
Skill Level to Build: 
some experience required

The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.

Kahuna

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

32' Bermudan or gaff-rigged cutter for construction in wood and epoxy

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.