Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

32' MYSTIC Sharpie Ketch

Designer: 
Edward S. Brewer
Skill Level to Build: 
Intermediate

This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 4 sheets....

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

Riva Scoiattolo Replica 1950's

Designer: 
Orinally by Riva, converted to CAD by Classic Wooden Boat Plans
Skill Level to Build: 
Beginer to advanced

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little...

Daysailer 30'

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

28' Camden Class

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

28′ LOA carvel-planked daysailer with small cuddy. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets.

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Stickleback Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.

Insider

Designer: 
Andrew Walters and Frank Smoot
Skill Level to Build: 
Beginner

Design Background

Insider is the product of my third collaborative venture with Frank Smoot, the designer and builder of some of the best small sailing trimarans around (www.diy-tris.com/). We both...