Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Digger 17

Designer: 
Paul (PAR) Riccelli
Skill Level to Build: 
novice

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

21' 4" Hodgdon Class Sloop

Designer: 
George I. Hodgdon, Jr.
Skill Level to Build: 
Advanced

Stable, easily handled family daysailer with a lead ballast keel. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 9 sheets.

Plans Note: Scantlings are...

ROBERTS 392

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 392 R/C Steel or Fiberglass This design is a companion to the Roberts 39 which until now has been available only in multi-chine hull form.

International 110

Designer: 
C Raymond Hunt
Skill Level to Build: 
intermediate

The plans and construction manual for the plywood International 110 are available to any class member for use to build new or rebuild and restore an older boat.

Milford 20

Designer: 
Neville Watkinson & Mark Fitzgerald
Skill Level to Build: 
Intermediate

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in...

Scherzando

Designer: 
Bosco Plana

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...