Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

696 results for All Boat Plans & Kits

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

Ozona Pram

Designer: 
JF Bedard, AMRINA
Skill Level to Build: 
beginner

A stitch & glue tender that can be rowed, motored and that sails like a charm. Can be purchased as a kit or plans.

Kits are Okoume, Meranti or Sapele Marine plywood, CNC-cut in-house, in our facility outside of Tampa FL.

A...

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

CURLEW

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Basic

26′ Auxiliary Ketch

Based on a traditional fishing vessel type called a “Cowhorn” this design features an inboard engine and ballast keel.

The arrangement provides two berths, a head and modest galley. The divided cockpit...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...