Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

Eastport Nesting Pram

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully. In this “nesting” version, but...

Almaguin 400

Designer: 
Matthew Marsh
Skill Level to Build: 
Beginner to intermediate

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.