Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Trover

Designer: 
John Welsford
Skill Level to Build: 
Very basic woodworking skills

Very simple workboat for outboard motor power. Suits 8 to 30 hp motors,carry up to six persons, can be built longer or shorter as required.

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...

ROBERTS 370

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 370 Fiberglass - Steel - Wood / Epoxy Such has been the response to this design that plans for it's construction are available in steel, aluminum, FIBREGLASS and Wood Epoxy.

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

ROBERTS CLASSIC 50

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CLASSIC 50 This new round bilge Classic sailboat can be built in round bilge steel or aluminum. The design features a long keel and will appeal to the pure traditionalist.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

PALOMA SAILING

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
advanced

PALOMA is an open sailing boat for family excursions. It’s a simple traditional and versatile boat which has been designed in three version as a small cruiser, as an open daysailer and as a motorboa

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...