Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

WITTHOLZ Angler

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate to Advanced

A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets

Arctic Hawk

Designer: 
Mark A. Rogers
Skill Level to Build: 
Intermediate/ Advanced

As much functional sculpture as sea kayak, the Arctic Hawk™ could be the most refined stitch-and-glue watercraft anywhere in the world.

Baby Tender

Designer: 
Warren Jordan
Skill Level to Build: 
Intermediate/Beginner

The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in. Construction is...

TRAWLER YACHT 43 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Trawler Yacht 43 STEEL KIT or PLANS & CUTTING FILES Trawler Yacht 470 FIBERGLASS PLANS & FSP

These trawlers are designed in accordance with Lloyds for category 1 (unrestricted operating /

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

13' 4" Melonseed skiff

Designer: 
Marc Barto
Skill Level to Build: 
Intermediate

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam-bent frames.

Alternative construction: Cold-molded or...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...