Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

owe 25

Designer: 
Francesco Belvisi
Skill Level to Build: 
medium

Owe 25 is an high performance sport boat.

The lower part of the hull is made from strip planking, the other parts are made from plywood and wood sandwich.

A boat simple and stiff, available in boat kit.

We can provide vpp...

Berry Point 26

Designer: 
Tad Roberts
Skill Level to Build: 
moderate

The Berry Point 26 was designed to fulfill a need for a traditionally stylish, trailerable, moderately fast, and capable family cruiser. She had to be shallow draft, economical to operate and simple.

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft....

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

NEREIDE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NEREIDE is the classical canoe used on lakes or rivers of North America. For the last two centuries it has been built with very slight differences in shape, which is in itself a guarantee of quality.

K-48

Designer: 
Paul Kotzebue
Skill Level to Build: 
Advanced

48 ft Daysailer based on the 40 Square Meter class.

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.