Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Tolman Skiff Standard

Designer: 
Renn Tolman
Skill Level to Build: 
beginner-intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

Berry Point 26

Designer: 
Tad Roberts
Skill Level to Build: 
moderate

The Berry Point 26 was designed to fulfill a need for a traditionally stylish, trailerable, moderately fast, and capable family cruiser. She had to be shallow draft, economical to operate and simple.

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

Eastport Nesting Pram

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully. In this “nesting” version, but...

Fisherman 23

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

The design of the Fisherman 23′ came from the request of a customer to build a sport fishing boat, fast, trailerable and also comfortable for family trips.
It’s a boat of modern design that is inspired by the American fisherman, with forms...

Cypress Pirogue

Designer: 
Nicholas Poret
Skill Level to Build: 
Beginner

Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes. Most of them were...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

20' Yawl, SALLEE ROVER

Designer: 
Samuel S. Crocker
Skill Level to Build: 
Advanced

A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting...