Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

ETTA MAY

Designer: 
Peterson Associates, Inc.
Skill Level to Build: 
moderate

Auxiliary cruising sloop evolving from the Hudson River and Friendship sloops.

Excellent for single handling with 450 sq. ft. of working sails, open decks and large cockpit.

Arrangement includes two berths with optional pipe berths...

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Design 077

Designer: 
George Whisstock
Skill Level to Build: 
Well organized beginner

The baby of our pocket cruiser range, Design 077 is a remarkably robust and sea-kindly small cruising sail boat. Available as a gaff yawl or gunter rig cutter.

She is very straightforward to build on five ring frames and a backbone,...

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft....

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...