Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

ROBERTS SPRAY 55

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 

Spray 55 - STEEL PLANS & FRAME PATTERNS Many examples of this design can be found cruising in various parts of the world. Specially designed for Multi Chine Steel Construction.

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.

Sea Bright 36

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

SEA BRIGHT 36

L.B.P.: 36′

BEAM: 10′ 11″

DRAFT: 1′ 8″/4′ 7″

DISPLACEMENT: 9,500 lbs

BALLAST: 3,483 lbs, 2,000 lbs lead foil laminated in keel; 250 lbs trim; 633 lbs water; 600 lbs fuel

WATER: 75...

Vik 183

Designer: 
Erik Lerouge
Skill Level to Build: 
High

Vik 183 is a cruising-racing development of the 180.
She benefits from deep daggerboards, a taller carbon mast, less cabins and great attention in keeping all weights amidships.
She is customised to your exact sailing program with a...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

25' Sea Bird Yawl

Designer: 
Charles G. MacGregor
Skill Level to Build: 
Intermediate

A simple and seaworthy V-bottomed centerboard cruiser with accommodations for two.

Construction: Plywood planking over sawn frames

Lofting is required

Plans include 10 sheets.

Pax 20

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped