Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

15' 0" Hiawatha

Designer: 
Ted Moores
Skill Level to Build: 
novice

The Hiawatha is a general purpose recreational canoe of light displacement, designed in the tradition of contemporary American cruisers. A good solo canoe, it is also very fast and responsive.

Beaver Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

ROBERTS 39 POWER SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexperienced builder. All of the developing is done

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

GARVEY 33

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL...

GulfStream 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience

The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...