Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

DragonFlyer 3.2 kit

Designer: 
John Brooks
Skill Level to Build: 
Beginner to intermediate

DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way. The kit includes precision-cut, high-quality marine...

Almaguin 400

Designer: 
Matthew Marsh
Skill Level to Build: 
Beginner to intermediate

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.

Skoota 28

Designer: 
Woods Designs
Skill Level to Build: 
average

The Skoota 28 is a 28 ft plywood demountable coastal cruising power catamaran for a couple. Ideal for the European canals, the PNW or the Great Loop. It will demount for transport on a flat bed lorry/truck or could even be towed by a large car...

POLLY

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

POLLY, designed to compete in Diecipiedi (10 Foot) Class (www.diecipiedi.it) is rather large and stable. Quite comfortable for its size it may be used also for sailing excursions.

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Ozona Pram

Designer: 
JF Bedard, AMRINA
Skill Level to Build: 
beginner

A stitch & glue tender that can be rowed, motored and that sails like a charm. Can be purchased as a kit or plans.

Kits are Okoume, Meranti or Sapele Marine plywood, CNC-cut in-house, in our facility outside of Tampa FL.

A...

ATLANTIC 550

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS.

ATLANTIC 550 - Sport fisherman Plans & FULL SIZE frame patterns for building in FIBERGLASS OR WOOD EPOXY