Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

696 results for All Boat Plans & Kits

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Sapphire 27

Designer: 
George Hisstock
Skill Level to Build: 
Reasonable woodworking skills

The Sapphire 27 is developed from our very successful Design No. 056, to give a more traditional cruising oriented layout both down below and on deck. Modifications include a little more freeboard, better headroom throughout, a simpler, more...

Sabor, RYD-14.6

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Handy novice

Sabor (RYD-14.6) is designed for only one thing and is an entry level to experienced sport sailor. An open transom, reversed sheer and built in floatation insure she's not mistaken for something else.

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

32' MYSTIC Sharpie Ketch

Designer: 
Edward S. Brewer
Skill Level to Build: 
Intermediate

This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 4 sheets....

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.