Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

START 80

Designer: 
ACDesign
Skill Level to Build: 
intermediate

This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.

The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume. The interior...

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.

Spike Skiff 12' 3"

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Petrel Play

Designer: 
Nick Schade
Skill Level to Build: 
Intermediate

Paddlers are demanding versatility AND performance from their sea kayaks these days. Little by little, designers like Nick Schade are squeezing huge performance out of compact dimensions.

The Petrel Play is just 14 feet long, a length...

Night Heron

Designer: 
Nick Schade
Skill Level to Build: 
moderate

An Inuit inspired strip planked sea kayak. Fast, efficient and responsive. A graceful design that paddles beautifully

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.