Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

ROBERTS 470

Designer: 
BRUCE ROBERTS-GOODSON

ROBERTS 470 - WOOD EPOXY The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.

K-6m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Intermediate

36 ft Daysailer / Overnighter based on the International 6 Metre class sailing yacht.

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

Pretty Marsh

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate to advanced

Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.

Pulling Boat, LIZ

Designer: 
Ken Bassett
Skill Level to Build: 
Advanced

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded,...

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...

Williams 24' Gaff Yawl

Designer: 
Fenwick C. Williams
Skill Level to Build: 
Advanced

A simple, spacious, singlehanded cruiser designed for carvel construction.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans include 7 sheets...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...