Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

Petrel 28

Designer: 
Cristian Pilo
Skill Level to Build: 
beginner to intemediate

A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and...

Wittholz 17' Catboat

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate

V-bottomed cruiser designed for plywood construction with accommodations for two and inside ballast.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 11 sheets.

Please note: gaff...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Dace - RYD-8.4

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
novice

Dace - RYD-8.4 is a fat little yacht tender. Originally designed for carrying quite a load to and from a buddy’s 40′ yacht.

ALUCAT MC 38

Designer: 
Sebastian Mazza Campos
Skill Level to Build: 

The Alucat MC38 is a modern European style catamaran. Designed to be built in 5086 this stylish aluminum catamaran draws together the main features sought by sailors ocean.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...