Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

Sharpie Cat 42

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

The Sharpie Cat 42 is a new catamaran design from a regular WoodenBoat contributor, author and marine architect Reuel B. Parker. She is a fast cruising cat with accommodations for eight in four cabins. Construction is cold-molded wood/epoxy,...

START 80

Designer: 
ACDesign
Skill Level to Build: 
intermediate

This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.

The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume. The interior...

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Thomson 11' Skiff

Designer: 
Asa Thomson
Skill Level to Build: 
Intermediate

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.