Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Daysailer 30'

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

Pulling Boat, LIZ

Designer: 
Ken Bassett
Skill Level to Build: 
Advanced

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded,...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Fisherman 17

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

17′ CENTER-CONSOLE FLATS FISHERMAN
L.O.A.: 16′ 10″
L.W.L.: 15′ 1″
BEAM: 6′ 5″
RAFT: 9 3/4″ Static, Laden
SUGGESTED POWER—25 to 75 HP

TYPE: Tropical and sub-tropical flats fisherman/guide boat, especially suited...

Riva Scoiattolo Replica 1950's

Designer: 
Orinally by Riva, converted to CAD by Classic Wooden Boat Plans
Skill Level to Build: 
Beginer to advanced

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little...

Ozona Pram

Designer: 
JF Bedard, AMRINA
Skill Level to Build: 
beginner

A stitch & glue tender that can be rowed, motored and that sails like a charm. Can be purchased as a kit or plans.

Kits are Okoume, Meranti or Sapele Marine plywood, CNC-cut in-house, in our facility outside of Tampa FL.

A...