Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

24' 9" Canoe Yawl WENDA

Designer: 
Albert Strange
Skill Level to Build: 
Advanced

A charming, shoal-draft, carvel-planked cruiser for two.

Wenda possesses a timeless elegance.

She’ll work her magic in the 21st century as she did in the 19th.

Construction: Carvel planking over steamed frames.

...

Eastport Pram

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

It rows, it tows and it sails; it's a convenient 7' 9" long and easy on the eyes; and it's a wonderful kit to build, taking a novice only 40-50 hours to assemble plus a little more for finishing.

Albury Runabout

Designer: 
Albury Brothers / plans by Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.

Construction: Strip-planked over laminated frames.

Alternative construction: Cold-molded, plans included.

...

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

Vik 183

Designer: 
Erik Lerouge
Skill Level to Build: 
High

Vik 183 is a cruising-racing development of the 180.
She benefits from deep daggerboards, a taller carbon mast, less cabins and great attention in keeping all weights amidships.
She is customised to your exact sailing program with a...

15' 9" Huron Cruiser

Designer: 
Bear Mountain Boats
Skill Level to Build: 
novice

The lines for this canoe were taken from an original 'Huron' built in cedar/canvas by the Peterborough Canoe Company. It was a second grade model in a series of Cruiser canoes that measured from 16'x33" to 18'x37". "They have good carrying...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...