Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Lone Star Twelve Rowboat

Designer: 
victory studios
Skill Level to Build: 
moderate

Lone Star Twelve rowboat, built using traditional methods, but with marine plywood for a leak free low maintenance hull. No lofting required. Includes measurements for station molds, transom, construction details and full size stem pattern....

Kalostyn

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.

I created a design that had lots of curves in order to demonstrate how to put these...

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

Cypress Pirogue

Designer: 
Nicholas Poret
Skill Level to Build: 
Beginner

Everyone from Louisiana seems to remember that cypress pirogue boat Pawpaw kept in his barn. Cypress pirogues have since become a relic of the past. Pirogues are flat bottom boats designed to paddle shallow swamps and marshes. Most of them were...

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

SANPIERA

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.