Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

25' Keel/Centerboard Sloop

Designer: 
John Alden
Skill Level to Build: 
Advanced

A fast and able auxiliary cruiser with wheel steering and accommodations for three.

Construction: Carvel Planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 5...

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

Catboat Tom Cat

Designer: 
William Garden
Skill Level to Build: 
Advanced

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

16' Quattro Catamaran

Designer: 
Richard and Lilian Woods
Skill Level to Build: 
Basic

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

ROBERTS 470

Designer: 
BRUCE ROBERTS-GOODSON

ROBERTS 470 - WOOD EPOXY The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.