Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

7' 7" Nutshell Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.xx

The ladder frame—the “foundation” of the boat—is now included with...

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

ROBERTS 64

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 64 - Steel or Aluminum or Fiberglass

This design was originally based on the very successful Roberts 53 and is assured of acceptance by those builders who require a larger boat.

DragonFlyer 3.2 kit

Designer: 
John Brooks
Skill Level to Build: 
Beginner to intermediate

DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way. The kit includes precision-cut, high-quality marine...

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

24' 9" Canoe Yawl WENDA

Designer: 
Albert Strange
Skill Level to Build: 
Advanced

A charming, shoal-draft, carvel-planked cruiser for two.

Wenda possesses a timeless elegance.

She’ll work her magic in the 21st century as she did in the 19th.

Construction: Carvel planking over steamed frames.

...

Zimmer 21' Utility Launch

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

A fuel-efficient, carvel planked, displacement launch designed to be powered by a 6 to 8-hp diesel.

Comfortable for 2 people cruising or 6-8 people day running.

Construction: Carvel planked over steamed frames

Alternative...