Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

832 results for All Boat Plans & Kits

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Tolman Skiff Jumbo

Designer: 
Renn Tolman
Skill Level to Build: 
intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

Coot

Designer: 
Nick Schade
Skill Level to Build: 
easy

The Coot is a handy little yacht tender with a lot of capacity. The “pram” style design has transoms at boat ends, this provides a lot of capacity in a short length and has the added benefit for the first-time wooden boat...

Unicat 2.4

Designer: 
James Brett
Skill Level to Build: 
Amatuer

A practical and stable 8' (2.4m) pram dinghy suitable for up to 3 adults. Ideal for fishing or as a tender for larger boats.

20' Yawl, SALLEE ROVER

Designer: 
Samuel S. Crocker
Skill Level to Build: 
Advanced

A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting...

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...