Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

NAVCAT Limousine

Designer: 
Naviculus
Skill Level to Build: 
Medium

The “NAVCAT Limousine” is a premium mode of transport with chauffeur.

Designed for 18 km/hr top speed with a range of approx. 10hrs at 8km/hr.

The boats wooden construction and large open windows offer a charm unique, combining...

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

13' Sailing Peapod

Designer: 
Doug Hylan
Skill Level to Build: 
Basic to Intermediate

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

...

WITTHOLZ Angler

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate to Advanced

A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets

27' 6" Sloop, Controversy

Designer: 
Mt. Desert Yacht Yard
Skill Level to Build: 
Intermediate to Advanced

This design has a built-down keel to provide a deeper bilge, a centerboard housed entirely within the ballast keel, and a straight sheer.

Construction: Strip-planked over bulkhead / frames

Lofting is required.

Plans include...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...