Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

ROBERTS 345

Designer: 
BRUCE ROBERTS-GOODSON

Roberts 345 - MC steel or aluminum, R/C Steel, Fiberglass, Wood Epoxy Originally this was designed for lightweight frameless multi-chine steel construction and met with such success that, due to dem

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Sharpie 24 Hampton Flattie

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low to Moderate

24′ Chesapeake Bay Hampton Flattie

L.O.A.: 24′ 2″
L.W.L.: 22′ 8″
Beam: 7′ 9″
Draft: 2′ ½″/3′ 9″
Sail Area: 263 sq ft
Weight: 2,500# (approx)

Proportionately, this is the largest sharpie type known, and...

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.