Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

ROI 44

Designer: 
ROI MATTY

The boat is high performance light weight 44 feet catamaran:
Hull weight -4.5 t

The catamaran Build kit contains:

  1. A set of DXF drawing ready to be sent to a cutting facility or set of plans for hand cutting made of 27
  2. ...

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

Caledonia Yawl II

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

This is the 7 plank per side, which some folks will feel is...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

Digger 17

Designer: 
Paul (PAR) Riccelli
Skill Level to Build: 
novice

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.