Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

12' Marisol

Designer: 
Gifford Jackson
Skill Level to Build: 
Basic to Intermediate

Open daysailer featuring plywood construction.

Construction: Lapstrake plywood over sawn frames

No lofting is required

Rig: Sliding Gunter

Plans include 35 sheets

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

22' Fox Island Class

Designer: 
Joel White
Skill Level to Build: 
Intermediate

This double-ended sloop combines genuine tradition and modern performance.

Construction: Glued-lapstrake plywood over laminated frames.

Lofting is required.

Plans include 4 sheets.

VOYAGER 495

Designer: 
BRUCE ROBERTS-GOODSON

VOYAGER 495 CRUISING SAILBOAT STEEL KIT or PLANS and CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS. The Voyager 495 radius chine kit is the latest refinement of this world cruising sail.

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class.

The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup.
As the down-scaling would leave the boat with to little righting moment...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...