Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Catboat

Designer: 
Andrew Walters
Skill Level to Build: 
Advanced

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.

I decided to design one with the aim of building it...

18' Single Shell FIREFLY

Designer: 
Ken Bassett
Skill Level to Build: 
Basic to Intermediate

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.

ALUCAT MC 38

Designer: 
Sebastian Mazza Campos
Skill Level to Build: 

The Alucat MC38 is a modern European style catamaran. Designed to be built in 5086 this stylish aluminum catamaran draws together the main features sought by sailors ocean.

20' Dark Harbor 12 1/2

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

20' LOA carvel-planked open daysailer. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 4 sheets, and suggested for experienced builders only as the plans...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

PUCK 550 REGATA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

PUCK 550 REGATA has been designed with the intention of creating a MICRO CLASS easily and quickly realizable with the stitch and glue method, but able to compete seriously in the class.