Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

MicroCatboat

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The design of the boat comes by request of a customer who already owns a Charles W. Wittholz’s catboat and wanted to have a beautiful tender for his yacht. We designed, therefore, a small dinghy of only 2.6 meters with simple and elegant lines,...

Lumber Yard Skiffs

Designer: 
Walter Baron

LYS stands for Lumber Yard Skiff. These rugged flat bottom work skiffs were originally designed to be built using materials readily found in most lumber yards- underlayment plywood and spruce framing. Construction style was also kept simple,...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.