Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Trawler 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience required

Our Trawler 28 is a sturdy offshore trawler with a straight shaft inboard diesel. This makes the TW28 an ideal boat for a couple to live aboard or for a crew of 4 on vacation.

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

ROBERTS 482

Designer: 
BRUCE ROBERTS-GOODSON

ROBERTS 482 R/C STEEL OR ALUMINUM

The accommodation could be laid out in many ways and this boat is ideal if you would like to customize your own interior. This is a fast cruising design.

18' Single Shell FIREFLY

Designer: 
Ken Bassett
Skill Level to Build: 
Basic to Intermediate

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.

Malabar II

Designer: 
John Alden
Skill Level to Build: 
advanced

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

Thomson 11' Skiff

Designer: 
Asa Thomson
Skill Level to Build: 
Intermediate

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...