Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

Strike 18 sailing trimaran

Designer: 
Woods Designs

The 18ft STRIKE is a sailing trimaran design that uses a 16ft beach cat as the outriggers/amas and rig. The main hull is plywood and has a dory shape that is extremely easy to build. The cabin top is removable to convert a fast day sailing boat...

DIAPASON 750

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

24' 6" Sloop, TYPHOON

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.