Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Zimmer 21' Gaff Sloop

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

Centerboard sloop with inside ballast and two settee berths for coastal cruising.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 5 sheets.

Olga 28

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

The Olga 28 was designed as a light, relatively fuel efficient cruising boat for the waters around Orcas Island, in the Salish Sea, where the Strait of Juan de Fuca and the Strait of Georgia meet. Strong currents are the norm, and while winds in...

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Elf

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 8 sheets with photocopies of Classic Boat building series.

Sail Area - 53 sq. ft.

D'ANNA

Designer: 
Doug Hylan
Skill Level to Build: 
advanced

D'ANNA is a 30' cold-molded evolution of the 29' Beals Island lobster boat, DIANA

Floom, RYD-29.6

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced because of size

Floom (RYD-29.6) is one in a series of river/houseboat designs. This version is available in two widths, 7' and 9'. The V bottom hull propels very easily, doesn't slap and is quite stable.

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...