Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

Mill Creek 13

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 13 looks good, they're easy to build, and even though they are more stable than most kayaks, the Mill Creek 13 offer good speed and handling that you'll never get tired of.

Barrelback 19 foot Custom

Designer: 
Classic Wooden Boat Plans
Skill Level to Build: 
Moderate

Original authentic copies are scarce for the 19 Barrelback, certainly no shortage of modified and self translated versions available. Due to lack of details and authenticated plans this version of a 19 foot barrelback should best be described as...

Long Lake

Designer: 
Dave Kuperstein
Skill Level to Build: 
beginner

Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.

TRAWLER YACHT 520 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Voyager TY 520 Kit or Cutting files Developed from our proven Trawler range - This kit is for the serious cruiser or 'live-aboard'. The displacement hull is capable of cruising at around 8 to 14 kt

Digger 17

Designer: 
Paul (PAR) Riccelli
Skill Level to Build: 
novice

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

ROI 44

Designer: 
ROI MATTY

The boat is high performance light weight 44 feet catamaran:
Hull weight -4.5 t

The catamaran Build kit contains:

  1. A set of DXF drawing ready to be sent to a cutting facility or set of plans for hand cutting made of 27
  2. ...