Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

836 results for All Boat Plans & Kits

65 ft Trawler

Designer: 
R.C.Johnston
Skill Level to Build: 
Professional

This is a well tested design for long range ocean passages. It has a heavy steel hull and aluminum superstructure. Propulsion is by twin Cat engines driving open props protected by heavy skegs.

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

PALOMA SAILING

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
advanced

PALOMA is an open sailing boat for family excursions. It’s a simple traditional and versatile boat which has been designed in three version as a small cruiser, as an open daysailer and as a motorboa

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

15' Prospector 'Ranger'

Designer: 
Steve Killing Yacht Design Inc.
Skill Level to Build: 
novice

Prospector 'Ranger' 15 - a pocket-sized prospector.

The Prospector models built by the Chestnut Canoe Company were made in lengths from 12 to 18 ft. filling a need for a canoe with greater carrying capacity than the Pleasure and Cruiser...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...